Re: [Amps] Resistor before the capacitor REDUX

["Bill, W6WRT" <dezrat1242@yahoo.com>]

ORIGINAL MESSAGE:

On Mon, 8 Feb 2010 17:04:30 -0700, "Jim  Garland" <4cx250b@muohio.edu>
wrote:

>(Actually, I've multiplied all the results below by 100, since I used a 30V
>supply to simulate an HV supply with a no-load output of 3000V.)

REPLY:

If you are going to drop the supply from 3000 to 30 V, shouldn't you
drop the load from 2200 to 22 ohms also? 

Even then, I'm not sure this is a correct simulation. It should be
tried at full voltage to be sure. 

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps