[Amps] 8877 Homebrew Pictures

[monty taylor <mtaylor12@clear.net>]

Jim,
 
What are you using for a tuned input.  Cannot tell if that is a pi or l
network.  I was looking for a good switched network kit or boards for a pair
of 8877's, which is about 26 ohms input impedance.  I would like to mount it
at the tube socket base; more complicated, but tube sockets are about 12
inches from panel; not optimum for components mounted on the manual switch.
 
Best regards,
Monty/WB5GLB since 1969
 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps