ORIGINAL MESSAGE:
On Fri, 9 Apr 2010 05:58:35 -0700, "Jim Thomson" <Jim.thom@telus.net>
wrote:
> My patience ran out a long time ago, with trying to build 9 x tuned inputs.
>
REPLY:
I agree, building 9 tuned inputs is a drag, but with some tubes (8877,
pair of 3-500z) you don't need a pi-network input, which simplifies
things considerably.Their input impedance is already close to 50 ohms.
A simple LC tank coil provides the flywheel effect and requires only a
single wafer bandswitch, a simple coil and one cap per band. I used 9
Arco compression trimmers, which admittedly is a bit expensive, but
once set, never needs to be touched again.
Jim's method works. To each his own.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|