Amps
[Top] [All Lists]

Re: [Amps] Capacitor identification

To: "Pete Raymond" <n4kwpete@centurylink.net>, <amps@contesting.com>
Subject: Re: [Amps] Capacitor identification
From: "Pete-N4KW" <n4kwpete@centurylink.net>
Date: Sat, 31 Jul 2010 23:43:32 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Thanks to all that responded to my below request.  I have contacted the 
companies you all mentioned and left them an email.  Hopefully I will get a 
positive reply.
73 Pete N4KW

----- Original Message ----- 
From: "Pete Raymond" <n4kwpete@centurylink.net>
To: <amps@contesting.com>
Sent: Friday, July 30, 2010 8:44 PM
Subject: [Amps] Capacitor identification


>I am wondering if anyone can identify the manufacturer of this capacitor.
> The markings on the edge
> are  "HI-Q HPA 42 BC, 6800mmf +40 -20%.  If I can find out who made this
> capacitor then I can ask them about the voltage that it is rated for.  I 
> was
> told it came off an amplifier and I would like to use it as a plate 
> coupling
> capacitor in a linear but need the voltage rating.
>
> The physical size is 1 3/4" in dia and 1/2" thick with threaded hole on
> either face.
>
> 73 Pete N4KW
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Amps] Capacitor identification, Pete-N4KW <=