There are hundreds of "tin bashers" in the UK and there must be plenty in
Norway if you want a cabinet made for you. The challenge is to make a
drawing they can understand, preferably in AutoCad or similar with dxf
output that you can email. Often they will have a showroom showing what
they can do, so, you could point to a particular type and modify the
dimensions for what you need.
David
G3UNA
> Thank you for this good link Samir. Looks like K3IWK is specialising
> in just cabinet work. Only problem is that I am located in Europe, but
> flat packed kits may perhaps be possible to send. The shipping cost
> would have to be checked out eventually.
>
> 73
> Marius
> LB3HC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|