This setup looks like a pirate radio station!
There, I said it.
73
Jim W7RY
--------------------------------------------------
From: "Jim Thomson" <jim.thom@telus.net>
Sent: Saturday, October 30, 2010 10:47 PM
To: <amps@contesting.com>
Subject: [Amps] use or not coaxial audio cable to transmitter's
> Date: Sat, 30 Oct 2010 20:49:11 -0500
> From: "Gary Schafer" <garyschafer@comcast.net>
> Subject: Re: [Amps] use or not coaxial audio cable to transmitter's
>
> An impedance mismatch at the antenna (high reflected power) does not cause
> RF to appear on the outside of the coax.
> The reason RF is on the shield of the coax is because it is acting as part
> of the antenna. Just like a dipole does when no choke is used at the feed
> point.
> The antenna may also be too close to the rig and radiating directly into
> the
> rig/microphone cable.
>
> 73
> Gary K4FMX
>
> ## His coax is 2.5M long. 2.5m = 8.2' His ant is
> probably 4-6' away. Stick 500w into a vertical...
> 4-6' away...and it could be a problem. It will work
> mobile, so it can be done.
>
> Jim VE7RF
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1153 / Virus Database: 424/3228 - Release Date: 10/30/10
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|