Mike,
Even with the best watt meter, ie: my Bird digital RF Power Analyst, if the
load is mismatched, the forward power can read much higher than the actual
output. This guy should also list the reflected power at the time of
measurement.
Hal W5GHZ
--- On Sun, 11/21/10, Mike <noddy1211@sbcglobal.net> wrote:
From: Mike <noddy1211@sbcglobal.net>
Subject: Re: [Amps] 1800 Watt Henry 2K4?
To: amps@contesting.com
Date: Sunday, November 21, 2010, 5:48 PM
Of course, you are missing the optimistically calibrated signal meter.
Mike
____________________________________________________________________________
__
I just ran across a 2KW on e-bay listed at 1800 out for 100 watts of drive.
I had one, but at 100 w of drive, with new tubes I never managed much
more than about 1200 out.
IIRC the manual also stated 1200 out.
Am I, or did I miss something?
73
Roger (K8RI)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|