For the 3CX800 its actually a stainless ring that fits over the tube with a
push and lock in place arrangement. It has 3 L legs with screw holes welded
to it that anchor to the matching chimney.
Both parts are complicated and pricey like all things Eimac.
Other collets for various tube can be a simple fingerstock ring or more
elaborate Rube Goldberg affairs from the geniuses at Eimac.
Carl
KM1H
----- Original Message -----
From: "Paul Decker" <kg7hf@comcast.net>
To: <amps@contesting.com>
Sent: Thursday, January 06, 2011 3:44 PM
Subject: Re: [Amps] plate collet???
>
>
>
>
> It is also known as an anode collet. Basically it's a ring of finger stock
> which makes contact on the tubes plate. Collets are also used in the
> metal/ceramic power tubes on the grid ring. You would also see them in
> wide use with the coaxial tubes to make contact rather than the pin
> sockets.
>
>
>
> It might look something like item (TUA) 149584
> http://www.surplussales.com/Tube-Sockets/TubeSkts-4.html
>
>
>
> But I haven't seen an actual picture or catalog entry for the one I'm
> looking for.
>
>
>
> Paul, kg7hf
>
>
>
>
>
>
>
>
>
>
>
> Date: Wed, 5 Jan 2011 17:54:27 -0800 (PST)
> From: "Randy S." <rj3819@yahoo.com>
> Subject: [Amps] plate collet???
> To: amps@contesting.com
> Message-ID: <879901.62876.qm@web37404.mail.mud.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
>
> What is a plate collet?
>
> Randy
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|