Amps
[Top] [All Lists]

Re: [Amps] Any designs for 4CX1000A on 2m ?

To: "Dr. David Kirkby" <david.kirkby@onetel.net>, "'AMPS'" <amps@contesting.com>
Subject: Re: [Amps] Any designs for 4CX1000A on 2m ?
From: "Carl" <km1h@jeremy.mv.com>
Date: Mon, 6 Jun 2011 18:57:19 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
K2RTH (SK) had a pair on 2M for decades, Im not sure which configuration but 
Id suspect parallel with a flat plate line.

Ive heard from several that it ran well over 2K out.

Carl
KM1H


----- Original Message ----- 
From: "Dr. David Kirkby" <david.kirkby@onetel.net>
To: "'AMPS'" <amps@contesting.com>
Sent: Monday, June 06, 2011 4:24 PM
Subject: [Amps] Any designs for 4CX1000A on 2m ?


> Are there any published designed for 2m linears using the 4CX1000A tube? I 
> tried
> to build an amp with a pair of them in push-pull grounded screen, but it 
> never
> worked well. Now thinking about something more modest - a single tube, 
> using a
> conventional socket with cathode grounded.
>
> I know there was a design in the ARRL handbook for a single-tube grounded 
> screen
> amp, which gave me the idea of a push-pull amp, but I never got it working 
> very
> well (it was drawing positive grid current with an output of only 300 W. 
> Had I
> pushed the input power, it would have probably damaged the tubes).
>
> I've seen comments that the grounded screen amp in the ARRL handbook was 
> not
> such a good idea, which is making me think it might be better to go along 
> the
> route suggested in the data sheet. i.e.
>
> cathode at DC ground
> grid at -60 V
> screen at +325 V
>
> I've also seen a design on the web which ties the screen and grid 
> together, to
> use the tube as a triode, but again I want to avoid that.
>
> Are there any decent designs for a 2m amp with a conventional usage of 
> voltages?
>
> I recall John Nelson, GW4FRX telling me the 4CX1000A presents more 
> problems to
> hams than any other tube, so I don't think it's the best device ever made, 
> but I
> happen to have quite a few sitting around collecting dust.
>
> Does anyone have a socket for one? I built the grounded screen sockets 
> myself
> (had access to a workshop at the time). But I want to buy an Eimac socket, 
> with
> the screen decoupling capacitor for this.
>
> -- 
> A: Because it messes up the order in which people normally read text.
> Q: Why is top-posting such a bad thing?
> A: Top-posting.
> Q: What is the most annoying thing in e-mail?
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1382 / Virus Database: 1511/3684 - Release Date: 06/06/11
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>