Amps
[Top] [All Lists]

Re: [Amps] al-811 wont transmit

To: <ww4cox@embarqmail.com>, <stevobags@gmail.com>, <amps@contesting.com>
Subject: Re: [Amps] al-811 wont transmit
From: "Carl" <km1h@jeremy.mv.com>
Date: Sat, 18 Jun 2011 08:21:45 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Chuckle.

Carl
KM1H


----- Original Message ----- 
From: <ww4cox@embarqmail.com>
To: <stevobags@gmail.com>; <amps@contesting.com>
Sent: Saturday, June 18, 2011 7:57 AM
Subject: Re: [Amps] al-811 wont transmit


Did you forget to hook up the key line between the 
amp and radio? The amp won't key without one.

Original Message:
-----------------
From: Stevo B stevobags@gmail.com
Date: Fri, 17 Jun 2011 20:43:55 -0400
To: amps@contesting.com
Subject: [Amps] al-811 wont transmit


Hey Boys and Girls,

I just picked up a used 811.  I was told it was tested 
prior to me picking
it up with no problems.  After a 150 mile car ride the 
amp will not
transmit.  I have 1700 volts on the plate and when I 
key up the rig I get
nothing.  No transmit light and no chnage in the 
meters on the amp.  The rig
is good and putting out as it should.

I only have the coax going from the rig to the amp 
and the coax going out to
the antenna.

Any help would be really appreciated!

Steve
N2MAI
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

--------------------------------------------------------------------
mail2web.com - What can On Demand Business Solutions do for you?
http://link.mail2web.com/Business/SharePoint


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1382 / Virus Database: 1513/3710 - Release Date: 06/17/11


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>