[Top] [All Lists]

[Amps] FS: SK410 sockets and blower

Subject: [Amps] FS: SK410 sockets and blower
From: Bill Turini <>
Date: Fri, 24 Feb 2012 15:56:47 -0800
List-post: <">>
I'm cleaning out a few things and have found a few items from an 
abortive attempt to build and amp.

EIMAC SK-410 socket for 4-400/3-500 etc.  Look and really are new.  They 
were mounted in a chassis and wired in. I installed the tubes to check 
clearances, but guaranteed never to have had electricity thru it. :-)  
And the connections are already tinned for you!  asking $60/pair/shipped US.

Also part of the attempt is a centrifugal blower.  I removed it from my 
Henry 2k-3 because I thought it was too small.  Works great, has 
starting cap and wires with connectors.   The mfg data was on a tag on 
the end of the motor, but it has fallen off.  I believe this was the 
original blower, so it should be more than adequate for a pair of 3-500z 
tubes.  I should not have replaced it.  I realized this when I turned on 
the amp and it sounded like a 747 was warming up in the room.  The tubes 
were cold to the touch.  Asking $45 shipped US.

$100 for both in one box, US.

Thanks for reading, and 73's


Bill Turini

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] FS: SK410 sockets and blower, Bill Turini <=