Amps
[Top] [All Lists]

Re: [Amps] 6kW coax?

To: "Ed Heimbach" <supermechanic18360@yahoo.com>, "David Shapiro" <info@transmittersrus.com>
Subject: Re: [Amps] 6kW coax?
From: "Carl" <km1h@jeremy.mv.com>
Date: Fri, 9 Mar 2012 17:49:20 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
But what do you use for connectors at that power level in a commercial 
enviroment?

Carl
KM1H


----- Original Message ----- 
From: "Ed Heimbach" <supermechanic18360@yahoo.com>
To: "David Shapiro" <info@transmittersrus.com>
Cc: <amps@contesting.com>
Sent: Friday, March 09, 2012 5:08 PM
Subject: Re: [Amps] 6kW coax?


> Commscope 1125 is what comes to mind,check it out.
>
> --- On Fri, 3/9/12, David Shapiro <info@transmittersrus.com> wrote:
>
> From: David Shapiro <info@transmittersrus.com>
> Subject: [Amps] 6kW coax?
> To: amps@contesting.com
> Date: Friday, March 9, 2012, 12:37 PM
>
> Question for the brain trust.
>
> I am looking for a cable (possibly made in teflon or not...) with 
> impedance
> around 70-75 Ohms that supports 6kW, this is for a final combiner for a 
> 10kW
> transmitter.
>
> Does such a cable exist?
>
> Brand or source information?
>
> Thanks in anticipation.
>
> G4ZOW
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2113/4860 - Release Date: 03/09/12
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>