You would require 7/8" Heliax for that level of continuous power at either
impedance.
Carl
KM1H
----- Original Message -----
From: "David Shapiro" <info@transmittersrus.com>
To: <amps@contesting.com>
Sent: Saturday, March 10, 2012 10:13 AM
Subject: [Amps] 6kW Coax
> Many thanks for all the comments and suggestions.
>
> There were several suggestions of 50 ohm cables.
>
> We need 70-75 ohm.
>
> This is for use inside a rack chassis, a compact one at that, so rigid, or
> semi-rigid cable is not suitable.
>
> I hope this block diagram link works of what we are looking at;
>
> http://i16.photobucket.com/albums/b2/Longchamp/12kw-NV-page-001.jpg
>
> Dave G4ZOW
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2113/4862 - Release Date: 03/10/12
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|