Hi all,
Now I have more clear the idea.
Thank you to all of you
73, Maximo
> From: km1h@jeremy.mv.com
> To: k8ri@rogerhalstead.com; amps@contesting.com
> Date: Thu, 17 May 2012 08:18:32 -0400
> Subject: Re: [Amps] Output choke - Calculation
>
> The ones used on most amps is 1 to 1.5mH, 100-300ma
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "Roger (K8RI)" <k8ri@rogerhalstead.com>
> To: <amps@contesting.com>
> Sent: Thursday, May 17, 2012 4:25 AM
> Subject: Re: [Amps] Output choke - Calculation
>
>
> On 5/17/2012 3:52 AM, Máximo EA1DDO_HK1H wrote:
> > Hi all,
> >
> > Just a quick one.
> >
> > How to calculate the output choke?
> > (I mean, the coil at antenna output to groud, to install in a homebrew
> > amplifier)
> It just needs to be a very high resistance at any operating frequency,
> bleed static to ground, and hopefully trip the PS out if the plate
> blocking cap goes.
> The general consensus is that the old 2.5 mH probably would blow open in
> such a case?
>
> > I don´t know if it is frecuency related and/or power related.
>
> Neither. if you are asking about the power output of the amp.
> It should have enough current handling capability to cause the PS to
> blow a fuse or shut down in case the blocking caps fail.
> I don't think I missed anything.
> It's only function in an amp is to get the plate voltage from ever
> getting to the coax connector and hence to the antenna if the blocking
> caps fail.
>
> 73
>
> Roger (K8RI)
> How to know how many uH is correct? Any software or table to get the
> right value? Thank you 73, Maximo - EA1DDO
> _______________________________________________ Amps mailing list
> Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2425/5004 - Release Date: 05/16/12
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|