Amps
[Top] [All Lists]

Re: [Amps] Another interesting tube

To: "Bill, W6WRT" <dezrat1242@yahoo.com>, "AMPS" <amps@contesting.com>
Subject: Re: [Amps] Another interesting tube
From: "Carl" <km1h@jeremy.mv.com>
Date: Mon, 30 Jul 2012 20:55:19 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Glass instead of ceramic and only a 150C seal limit means lots of air when 
trying for 1500W.
That really is an ancient technology tube and is only good to 6M.

Carl
KM1H





----- Original Message ----- 
From: "Bill, W6WRT" <dezrat1242@yahoo.com>
To: "AMPS" <amps@contesting.com>
Sent: Monday, July 30, 2012 1:18 PM
Subject: [Amps] Another interesting tube


> An interesting tube you might want to play with is the GU43b. About half 
> the
> price of a GS35b ($65 USD) and 1000 watts plate dissipation. It's a 
> tetrode so I
> used the swamped grid configuration. UR4LL seems to have the best price. 
> Sockets
> are expensive, but since it uses concentric ring terminals, a clever 
> machinist
> could avoid a socket entirely by using homemade spring clamps.
>
> Pix at
>
> http://www.zeitmann-tubes.com/MilitarySurplus/NosRussianMilitaryTubes/GU43B.htm
>
> which is a beautiful picture by the way. I downloaded the picture and used 
> it
> for a desktop background. Gorgeous.   :-)
>
> Some schematics at
>
> http://pa0fri.home.xs4all.nl/Lineairs/Frinear1500/FRI1500eng.htm
>
> I built an amp with one of these and it worked but with a couple of 
> caveats:
>
> 1. Although they are rated to 3.3 kVDC anode, they tend to arc with that 
> much
> voltage. Several European hams have confirmed the same thing. Hold the DC 
> down
> below 2.5 kVDC or less. The only PS I had was 3 kVDC so I gave it up.
>
> 2. There are two different base styles, differing in the center pin. Be 
> sure to
> get a matching socket when you buy the tube. I got a mismatched socket and 
> was
> able to fabricate a new center pin but it was a hassle. Get the right one 
> to
> begin with, or make your own connectors.
>
> You should be able to push a single tube to 1500 watts out but that leaves
> basically no headroom.  If I were to do it again I would use two in 
> parallel and
> hold the HV down to 2.0 kVDC or so. Lots of headroom.
>
> I'd be interested to hear from anyone who has built an amp with one or two 
> of
> these.
>
> 73, Bill W6WRT
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2437/5164 - Release Date: 07/30/12
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>