Amps
[Top] [All Lists]

Re: [Amps] Schematics  for 4CX250B GG HF amplifie r

To: Bill Fuqua <wlfuqu00@uky.edu>
Subject: Re: [Amps] Schematics  for 4CX250B GG HF amplifie r
From: donroden@hiwaay.net
Date: Wed, 15 Aug 2012 22:09:46 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
The "driver" was a KWM-2A and the amp was in a Bud cabinet that  
matched the Collins gear.  It made more power out than the 30L-1.

Don W4DNR



Quoting Bill Fuqua <wlfuqu00@uky.edu>:

> The 100 Ohm resistor would not hurt anything since under normal  
> operating conditions no current should
> flow thru it anyway. I would not recommend teeing off those  
> "golf-balls", it may damage them just as much
> as improperly driving them.
> 73
> Bill wa4lav
>
>
>
> At 07:21 PM 8/15/2012 -0500, donroden@hiwaay.net wrote:
>> Quoting Bill Fuqua <wlfuqu00@uky.edu>:
>>> The only thing the 100 Ohm resistor may have done is to snub out a VHF
>>> parasitic oscillation.
>>>
>>> 73
>>> Bill wa4lav
>>
>>
>> Whatever the theory, I GG ed a quad of golf-balls in the 70s and they
>> seemed no worst for the experience when I checked them in a Gonset 2
>> meter Amp several years later.
>>
>>
>> Don W4DNR
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
>


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>