Amps
[Top] [All Lists]

Re: [Amps] Molex Pins

To: amps@contesting.com, k5ww@live.com
Subject: Re: [Amps] Molex Pins
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Sat, 30 Mar 2013 19:48:45 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>

The old 24 pin ACC connector is an entirely different animal than
the Icom/Kenwood/Yaesu/etc. power connectors which vary all over
the map.  The ACC connector is Molex and the pin numbers are correct
as they came from Icom/Icom service manuals.

73,

   ... Joe, W4TV


On 3/30/2013 3:27 PM, Jim W7RY wrote:
If that's the same connector on the back of an Icom IC751A, then yes,
it’s a standard Molex.

We're talking about the power connector.
73
Jim W7RY


-----Original Message----- From: K5WW Live
Sent: Saturday, March 30, 2013 12:19 PM
To: Amps reflector
Subject: Re: [Amps] Molex Pins

It looks like I signed up for this email group at the right time!

I was about to order a Molex connector and the pins at Mouser to replace
the
24 pin connector on the back of my IC-2KL (P/N 538-03-06-1241 and
538-02-06-1132).

An old message on this list by Joe W4TV mentions that this connector is
made
by Molex; but now it seems like I better use some caution ordering them.

Does anyone here know for sure if those parts would be a good replacement?

Thanks, 73,

Erik - K5WW


----- Original Message ----- From: "Jim W7RY" <w7ry@centurytel.net>
To: "Paul Christensen" <w9ac@arrl.net>; "Col. Paul E. Cater"
<paulecater@gmail.com>; "Amps reflector" <amps@contesting.com>
Sent: Saturday, March 30, 2013 12:27 PM
Subject: Re: [Amps] Molex Pins


I've ordered Amp and several types of Molex from Mouser. None of them
fit.

73
Jim W7RY


-----Original Message----- From: Paul Christensen
Sent: Saturday, March 30, 2013 9:27 AM
To: Col. Paul E. Cater ; Amps reflector
Subject: Re: [Amps] Molex Pins

This is an obvious case of brain flatulence.  I have ordered 4 different
part numbers from Mouser for the *pins* only that fit the power
connectors
on Icom and other rigs.  The standard 6 hole kind.  I still don't
have the
correct size.

Are you certain they're Molex branded connectors?  Often these are
confused
with AMP/TE Connectivity "Mate 'N Lok."  Mouser, DigiKey, AvNet, and
Newark
will have these.

Paul, W9AC

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>