GM Iain,
I've included a link here http://www.nd2x.net/gs35-HF.html but
seems to me easiest to just calculate the plate load impedance given your
planned B+ value and tap accordingly per band. Whether its variable or
fixed on the schematic really doesn't matter if you plan ahead. GL
73 Dave N3DB
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Iain
Sent: Sunday, May 05, 2013 1:13 AM
To: Amps@contesting.com
Subject: [Amps] GS-35B Pi Tank design
Hi
Wonder if the group can point me in the right direction ?
I am building a GS-35B Amplifier for the HF bands and wanted to use a Fixed
(tapped) coil in the pi-tank rather than a roller inductor.
Does anyone know of a published (on the web) design of a GS-35B amp for HF
with a fixed tapped coil in the output ?
Thanks in anticipation
Iain G4DPF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|