Re: [Amps] SB200 on 6M

["Karel" <kebenstr@bmts.com>]

Thanks Carl,
can you tell me more, what is wrong with his methods (I know he gets too 
religious, but knows his technical stuff too). I talked with him some 10 
years ago, he might have changed a bit by now.
I did not understand what you meant by "use the generic brute force method".
Karel
VA3KO
----- Original Message ----- 
From: "Carl" <km1h@jeremy.mv.com>
To: "Karel Ebenstreit" <kebenstr@bmts.com>; <jim.thom@telus.net>; 
<amps@contesting.com>
Sent: Monday, June 03, 2013 9:34 PM
Subject: Re: [Amps] SB200 on 6M


> More like infamous. That is the voodoo crap I mentioned earlier.
>
> Carl
> KM1H
>
>
> Subject: Fw: [Amps] SB200 on 6M
>
>
> > sorry forgot to cc.
> > Karel, VA3KO
> >
> > ----- Original Message ----- 
> > From: "Karel Ebenstreit" <kebenstr@bmts.com>
> > To: "Louis Parascondola" <gudguyham@aol.com>
> > Sent: Monday, June 03, 2013 7:05 PM
> > Subject: Re: [Amps] SB200 on 6M
> >
> >
> > > Why do not  you use famous Richard Measure, he designs and sell 
> > > suppressors for all makes.
> > > I am not sure if he is still around, I used him for my 4-1000A's and 
> > > 3-500's. some time ago.
> > > Karel , VA3KO
> > >
> > > ----- Original Message ----- 
> > > From: "Louis Parascondola" <gudguyham@aol.com>
> > > To: <km1h@jeremy.mv.com>; <jim.thom@telus.net>; <amps@contesting.com>
> > > Sent: Monday, June 03, 2013 6:57 PM
> > > Subject: Re: [Amps] SB200 on 6M
> > >
> > >
> > > > Knowing the right suppressor to use on an SB-200 conversion is what 
> > > > makes the bucks.
> > > >
> > > > Having to use a high wattage resistor on such a small tube as a 572B 
> > > > means
> > > > you havent a clue about suppressor design, and simply use a generic 
> > > > brute
> > > > force method.
> > > >
> > > > Carl
> > > > KM1H
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Carl <km1h@jeremy.mv.com>
> > > > To: Jim Thomson <jim.thom@telus.net>; amps <amps@contesting.com>
> > > > Sent: Mon, Jun 3, 2013 5:56 pm
> > > > Subject: Re: [Amps] SB200 on 6M
> > > >
> > > >
> > > > > I'm converting a SB200 for 6M. What's the best configuration for the
> > > > > Anti-Parasitic Choke?
> > > > >
> > > > > Thanks
> > > > >
> > > > > - Paul
> > > > >
> > > > >
> > > > > ##  dunno.  BUT if the 2 watt carbon comp resistors heat up,  use more 
> > > > > of
> > > > > em in parallel,
> > > > > OR  use a small 7-10-15 watt  GLOBAR.    You can still buy the small
> > > > > globars  with wire leads
> > > > > out each end..still on their website.    Dunno what the min order is
> > > > > though.
> > > > >
> > > > > ##  On several 4-1000  HF amps from years ago, we would use five  of 
> > > > > those
> > > > > carbon comp resistors
> > > > > in parallel...end of heating problems.
> > > > >
> > > > > Jim  VE7RF
> > > >
> > > > Having to use a high wattage resistor on such a small tube as a 572B 
> > > > means
> > > > you havent a clue about suppressor design, and simply use a generic 
> > > > brute
> > > > force method.
> > > >
> > > > Carl
> > > > KM1H
> > > >
> > > > _______________________________________________
> > > > Amps mailing list
> > > > Amps@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/amps
> > > >
> > > >
> > > > _______________________________________________
> > > > Amps mailing list
> > > > Amps@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/amps
> >
> >
> > -----
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 10.0.1432 / Virus Database: 3184/5880 - Release Date: 06/03/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps