ORIGINAL MESSAGE: (may be snipped)
On Wed, 5 Jun 2013 20:08:41 +0300, Baruch wrote:
>
>I wish you luck
>look at what this German guy did
>I have used this device too ,had good results.
>BTW the cap needs to be bigger than 680uF
>regards
REPLY:
The cap on eBay is 6800, not 680 uF. I figure with 6800 and 120 Hz input the
ripple should be about 1.5% using the formula at
http://www.ehow.com/how_8386631_calculate-ripple-dc-power-supply.htm
If that's not enough, I'll add another cap.
Thanks for the other info. I have a friend who speaks German, I'll ask him
to translate. All encouraging so far.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|