That transformer will put out 1800-1900 VDC under load if you use the boost
winding.
Carl
KM1H
----- Original Message -----
From: "Paul Decker" <kg7hf@comcast.net>
To: <amps@contesting.com>
Sent: Saturday, October 12, 2013 2:01 PM
Subject: [Amps] AL-800H transformer
Hi Gang.
I have an AL-800H transformer, it is the only HV xmfr I have left. It
looks like it will produce about 2250 VDC.
I need to use it in another project to produce around 1100VDC no load, max
1300VDC at no more than 400 mA
I was thinking I could wire the primary as 250VAC input i.e. put all
primary windings in series and supply it with 110VAC input which should
drop the HV output to less than half.
What doe the experts on here say?
thanks,
Paul,
KG7HF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3222/6244 - Release Date: 10/12/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|