[Amps] Screen regulation

[Vic K2VCO <k2vco.vic@gmail.com>]

   For reasons that I won't go into, I want to put a 22 ohm resistor between a
   regulated  supply  and  the screen of a 4CX1000A. This would upset the
   regulation to the tune of 0.77 volts when the screen current swings between
   0 and 35 mA. Without the resistor, the regulator holds the screen voltage
   constant within 0.1 volt from 0 to 35 mA.
   From the standpoint of linearity/IMD would this be a problem?
-- 
Vic, K2VCO
Fresno CA
[1]http://www.qsl.net/k2vco/

References

   1. http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps