Ameritron also sells transformers for their 3CX800 amplifiers for decent
prices. They have buck/boost primary windings that allow quite a range of
plate voltages.
73,
Gerald K5GW
In a message dated 1/1/2014 8:39:55 P.M. Central Standard Time,
paul@paulbaldock.com writes:
The manual for the AL811 says the supply is 1500V at .7A, which
doesn't agree well with the Ameritron trany spec. If it was 2KV at
.7A it would be perfect.
- Paul
At 06:24 PM 1/1/2014, Paul Baldock wrote:
>According to the American Website that trany is 1500V @ .5A, so the
>1500V should give 2KV DC, but I need about .8A for this AM project.
>
>You are right, the price is very good.
>
>- Paul
>
>At 05:28 PM 1/1/2014, Carl wrote:
>>Too bad you cant use 1800V as the one from the AL-811/811H is the
>>best deal on the planet.
>>
>>Carl
>>KM1H
>>
>>
>>----- Original Message ----- From: "Paul Baldock" <paul@paulbaldock.com>
>>To: <amps@contesting.com>; <boatanchors@mailman.qth.net>
>>Sent: Wednesday, January 01, 2014 5:51 PM
>>Subject: [Amps] High Voltage Transformer(s) wanted
>>
>>
>>>High Voltage Transformer wanted:
>>>
>>>I am looking for a transformer that when rectified and cap
>>>filtered will provide about 2KV at .8A or two transformers where
>>>one will provide 2KV at .5A and the second 2KV at .3A.
>>>
>>>
>>>Thanks
>>>
>>>- Paul
>>>
>>>_______________________________________________
>>>Amps mailing list
>>>Amps@contesting.com
>>>http://lists.contesting.com/mailman/listinfo/amps
>>>
>>>
>>>-----
>>>No virus found in this message.
>>>Checked by AVG - www.avg.com
>>>Version: 2014.0.4259 / Virus Database: 3658/6967 - Release Date:
01/01/14
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|