Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] ACOM2000a problem

from [Paul Baldock] [Permanent Link][Original]
To: Andrius Ignotas <aignotas@gmail.com>,amps@contesting.com
Subject: Re: [Amps] ACOM2000a problem
From: Paul Baldock <paul@paulbaldock.com>
Date: Wed, 07 May 2014 16:19:28 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
Email Stan at ACOM. acom@mail.orbitel.bg

He will tell you what to do.

- Paul



 At 08:44 AM 5/3/2014, Andrius Ignotas wrote:

Hello
Need suggestions.
Got ACOM 2000A.
During startup at 139 sec message apears:  "BIAS TOO LOW AT POWER
ON : -099V"
Amp swithcing OFF.
OFF5 and CCC did.n't helps.
What to do?
Any comments about this situation?

Best regards
Andy LY2TA
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] complicated Bias circuit, Steve Gorecki VE3RX
Next by Date:  Re: [Amps] Building an amp suggestions, Bill Turner
Previous by Thread:  [Amps] ACOM2000a problem, Andrius Ignotas
Next by Thread:  [Amps] Building an amp suggestions, glenn riccio
Indexes:  [Date] [Thread] [Top] [All Lists]