Plus the 4-1000 needs a lot of plate volts in grounded grid, thus increasing
the requirements for the plate tuning capacitor and the bandswitch.
vy 73
Peter G3RZP
========================================
Message Received: May 08 2014, 11:23 AM
From: "Jim Thomson" <jim.thom@telus.net>
To: amps@contesting.com
Cc:
Subject: [Amps] Building an amp suggestions
Date: Sat, 3 May 2014 15:16:26 -0700
From: "glenn riccio" <gfriccio@hughes.net>
To: <amps@contesting.com>
Subject: [Amps] Building an amp suggestions
Hi every one , I am contemplating building another QRO amp. Several years
ago , I built a GG amp using a pair of 3-500z"s. Very conventional but it
works very well. I now have the urge to build another amp. I am considering
using a 4-1000 but I have read that it probably isn't the best choice for GG
service. Then I thought about class AB1. That also has its drawbacks as I
understand neutralization can be tough to get right. Since 99% of my
operating is CW, maybe a class C is the way to go.
Does any one have any suggestions as to the best tube to use other than
4-1000 ? Any ideas would be helpful. Thanks es 73 de K7GFR Glenn
## Good 4-1000s are tough to find.... most are soft...or have leaky seals.
Chinese 8877 or chinese 3CX-3000A7 is the way to go.
The 3cx-3000A7 will do an easy 1500w out with 50w of drive.....and
an easy 5.2 kw out with 200 w of drive. IMD is superb. The 225 watt CCS
is bombproof.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|