Amps
[Top] [All Lists]

Re: [Amps] Shunt resistors for a bridge made of 6A10 diodes in Alpha 91b

To: "Hardy Landskov" <n7rt@cox.net>
Subject: Re: [Amps] Shunt resistors for a bridge made of 6A10 diodes in Alpha 91b
From: "Steve Ireland" <vk6vz@arach.net.au>
Date: Fri, 29 Jan 2016 11:25:36 +0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Hi Hardy

Good to hear from you. Thanks for the great advice. After 20 years of hard, hot work, there is heat-related oxidisation over just about every joint/connection on the 91b power supply board. I'll be resoldering all the joints.

Vy 73

Steve, VK6VZ

-----Original Message----- From: Hardy Landskov
Sent: Friday, January 29, 2016 1:26 AM
To: 'Steve Ireland' ; amps@contesting.com
Subject: RE: [Amps] Shunt resistors for a bridge made of 6A10 diodes in Alpha 91b

Steve,
I don't think shunt resistors are needed anymore with today's close manufacturing processes. Someone may have a different opinion.

Also, check the leads that supply the filament current. They go through crimp connectors on the top of one of the pc boards. Mine developed an oxidation which burned up the insulators on the crimp connectors. I replaced the connectors and soldered the connectors and no problems since.
73 Hardy N7RT


-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Steve Ireland
Sent: Wednesday, January 27, 2016 11:32 AM
To: amps@contesting.com
Subject: [Amps] Shunt resistors for a bridge made of 6A10 diodes in Alpha 91b

G’day

I am refurbishing the power supply board in my Alpha 91b and am going to replace the KD202P diodes which make up the bridge with 6A10 diodes (1000V 6A and only A$1.95 each).

The original bridge had strings of five KD202P a side, with shunt resistors across each diode of 500K 1W. The stud mounted diodes are looking pretty burnt around the retaining washers/bolts, so it is definitely time (and I have a strange earth leakage fault).

Please, I’d really appreciate some advice about what value of shunt resistor to use on each of the twenty 6A10 that will make up the bridge?

PS The replacement encapsulated bridge rectifier sold by Alpha/RKR designs (5kV, 2A) is US$150, so this the reason for looking for a cheaper solution.

Vy 73

Steve, VK6VZ

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>