Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] Line voltage high

from [Stirling Schmidt] [Permanent Link][Original]
To: AMPS submit <amps@contesting.com>
Subject: Re: [Amps] Line voltage high
From: Stirling Schmidt <kc0nxm@gmail.com>
Date: Sat, 10 Dec 2016 17:51:07 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
Most variacs are 120/240 volt, depending on ratings, of course. However, I 
would use a low-value, high wattage variable resistor in the primary of the 
filament xfrmr.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Amps] FS Bird Model 43 Wattmeter Elements (slugs), John Watkins via Amps
Next by Date:  Re: [Amps] HIGH FILAMENT VOLTAGE, kenneth Johnson
Previous by Thread:  [Amps] FS Bird Model 43 Wattmeter Elements (slugs), John Watkins via Amps
Next by Thread:  Re: [Amps] Line voltage high, Mike Waters
Indexes:  [Date] [Thread] [Top] [All Lists]