Mark,
I think you are right about this, but the sunset of analog front-ends is
happening
faster than the HF tube PA one.
Price of late-generation analog transceivers:
Kenwood TS-590SG, about $1700
Yaesu FT-991A, about $1500
K3S, about $2900 (assembled, 100 watts)
Price of next-generation SDR radios:
Icom IC-7300, about $1400
KX3, about $1900 (assembled, with 100 watt outboard amplifier)
So we are already at a point where you can move to the next generation of
transceiver design
without paying a huge premium for comparable performance. For about $1500, you
can get
a seat in the game, and you won't find a new analog rig of similar performance
for less.
But what does the situation in HF amps look like?
Price of tube-based amps:
Ameritron AL-811H, ~600 watts, about $900
Ameritron AL-80B, ~800 watts, about $1500
Ameritron AL-82, 1500 watts, about $2800
ACOM 1000, 1000 watts, about $2800
ACOM 1500, 1500 watts, about $4000
Cost per watt: $1.50 - $2.80
Price of solid-state amps:
Ameritron ALS-600, 500 watts, about $1400
ACOM 600, 600 watts, about $2800
Elecraft KPA-500, 500 watts, about $3000
Elecraft KPA-1500, 1500 watts, about $6000
ICOM PW-1, 1500 watts, about $4900
Cost per watt: $2.80 - $6.00
So it's still not practical to get the same performance *at the same price* from
solid state power amplifiers. It will come, but it's not there yet.
You can quibble with the choices of amps that I picked to make the point, but
I don't think you can refute the core argument.
73,
Cathy
N5WVR
--------------------------------------------
Mark Hill <g4fph@mjha.co.uk> wrote:
> I think we are truly seeing the sun setting on valve HF PA and analogue
> front-end transceivers.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|