Your Google must be better than my Google. How about a link for those 12-40
panel nuts.
Doug
-----Original Message-----
I would try calling ARCO or one of their distributors. Maybe also try Max
Gaines systems. Maybe RF Parts can help. Regardless, I would call not
email.
If you Google 12-40 panel nuts you can find them too..if this is indeed the
correct size.
73,
Gary K9GS
-------- Original message --------From: Radio WC6W via Amps
<amps@contesting.com> Date: 4/30/17 1:26 PM (GMT-06:00) To: Jim W7RY
<jimw7ry@gmail.com>, amps@contesting.com Subject: Re: [Amps] Arco 30 Series
Trimmer Cap Nuts
Hi Jim,
Those are brass 12-40 panel (thin) nuts.
I searched for those in vain about a decade ago.
If you have access to a lathe, you might consider making some starting
with 3/8" brass hex stock and a 12-40 tap (rare, but not impossible to
find).
73 & Good morning,
Marv WC6W
http://qsl.net/wc6w/
--------------------------------------------
On Sat, 4/29/17, Jim W7RY <jimw7ry@gmail.com> wrote:
Subject: [Amps] Arco 30 Series Trimmer Cap Nuts
To: "AMPS" <amps@contesting.com>
Date: Saturday, April 29, 2017, 11:59 AM
I hope it?s okay if I post an amplifier
related post on this forum.... :(
Does anyone know what type of nut is
used on an Arco 30 Series ceramic
compression trimmer capacitor?
None of the standard (SAE) or metric
nuts at my local hardware store work.
Reference picture here:
https://www.rfparts.com/304m.html
Anyone have some? Need about 15 of
them.
Thanks!
73
Jim W7RY
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|