Amps
[Top] [All Lists]

Re: [Amps] 144 MHz GS35B update

To: N1BUG <paul@n1bug.com>,'Amps' <Amps@contesting.com>
Subject: Re: [Amps] 144 MHz GS35B update
From: Paul Baldock <paul@paulbaldock.com>
Date: Mon, 01 May 2017 19:17:36 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Take one more turn off and you could probably get 600W out with 0W drive.

- Paul



At 01:50 PM 5/1/2017, N1BUG wrote:
There we go. After reviewing pictures of several other amplifiers using this tube I removed one more turn from the coil on the tube side of the T match. Input SWR is 1:1 and the amp is making over 600 watts out with 25 watts in. I plan to run it this way for a while before I go for the real QRO.

Paul


On 05/01/2017 02:40 PM, N1BUG wrote:
I'm seeing more RF output with the new configuration, about 500W for
somewhere around 25W drive. It appears I am going to have some fun
getting the input SWR down but I guess everyone does. That's
probably why there are so many slight variations on coil dimensions
among the various plans.

My first try with both coils having 5 turns 15mm ID, 20mm long
resulted in minimum SWR of 3:1. My second try with 4 turns 15mm ID,
20mm long got it down to about 2.6:1. I am not sure whether to take
another turn off both coils or perhaps just the one on the tube
side. Many pictures of amps I have seen appeared to have less L on
the tube side although I don't see this mentioned in any
accompanying text.

Paul
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>