Amps
[Top] [All Lists]

Re: [Amps] PL172 (8295)

To: Carl <km1h@jeremy.qozzy.com>, RAY FRIESS <rayfrijr@msn.com>, "Amps@contesting.com" <Amps@contesting.com>, "chris@g3vbl.co.uk" <chris@g3vbl.co.uk>
Subject: Re: [Amps] PL172 (8295)
From: Glen Zook via Amps <amps@contesting.com>
Reply-to: Glen Zook <gzook@yahoo.com>
Date: Sat, 6 May 2017 16:12:59 +0000 (UTC)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
The chances of a PL-172, that has been unused for years, being good (no air 
leakage), are somewhere between extremely slim, and none!


I have a very late version Hallicrafters HT-33A (has all the circuitry of the 
HT-33B but not the dual meters, etc.) that has been badly "hacked" and cannot 
be easily, if at all, restored to original condition.  That amplifier is 
definitely a candidate to be modified to use a Russian GS-31b triode.  The 
GS-31b is the same diameter as the PL-172 and things like the blower, etc., 
will work without any changes.

 Glen, K9STH 
Website: http://k9sth.net

      From: Carl <km1h@jeremy.qozzy.com>
 To: RAY FRIESS <rayfrijr@msn.com>; Amps@contesting.com; chris@g3vbl.co.uk 
 Sent: Saturday, May 6, 2017 10:52 AM
 Subject: Re: [Amps] PL172 (8295)
   
The original PL-172 with glass seals is NOTORIOUS for air leakage and not 
outgassing from the anode.....big difference.


   
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>