Amps
[Top] [All Lists]

[Amps] Zener Diodes

To: <amps@xxxxxxxxxxxxxx>
Subject: [Amps] Zener Diodes
From: "Jim Thomson" <jim.thom@xxxxxxxxx>
Date: Sun, 28 May 2017 21:27:33 -0700
List-post: <mailto:amps@contesting.com>
Date: Sun, 28 May 2017 16:22:09 -0600
From: MU 4CX250B <4cx250b@xxxxxxxxxxx>
To: amps@xxxxxxxxxxxxxx
Subject: Re: [Amps] Zener Diodes

<Mike needed this as a replacement cathode bias diode in an old
homebrew 8877 amp with 2600V on the plate.  Manfred's suggestion is
the more contemporary solution, but in any case a 50W zener is way
overkill. A 10W zener would work just fine, and these are still
available without spending a fortune.
73,
Jim w8zr

## added note re series strings of diodes for bias.  The leads on the  1N5408  +
6A10  ARE the heatsink for the diodes, so keep the leads long.   Easy  to mount 
on vector board, as long as the holes are big, like .065+  to handle the .060 
leads 
of both types of diodes. ( aprx 16 gauge).   Since we are talking about real 
low 
voltages here, the diodes can all be phys mounted in parallel..then  wired in 
series.  
Then it all ends up being a compact assy. 

Jim   VE7RF

_______________________________________________
Amps mailing list
Amps@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>