Date: Sat, 2 Jun 2018 13:37:22 -0700
From: Jim Brown <jim@audiosystemsgroup.com>
To: Amps Amps <amps@contesting.com>
Subject: Re: [Amps] new 2200m/630m amplifier - distorted waveform
<WRONG -- again, it depends on what you mean by the word "balun," which
<is used to describe at least ten very different things.? A properly
designed common mode choke wound on a ferrite core, commonly called a
"current balun," SHOULD be VERY frequency sensitive, in that it should
present a very high resistive impedance at the frequency of interest. To
accomplish that, the number of turns and the core material must be
carefully chosen to put the self resonance at the frequency of
interest.? I've recently studied and found suitable designs for the new
480 kHz band, but not for 137 kHz.
<73, Jim K9YC
## Ok, Ill bite. How did you cook up a CM choke for use at 475 khz ?
Like with at least 5 k ohms of RS...and RS > XS.
## At 1st glance, type 77 might work.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|