Amps
[Top] [All Lists]

Re: [Amps] GM3SEK Triode and Tetrode Boards

To: Ian White <boards@ifwtech.co.uk>
Subject: Re: [Amps] GM3SEK Triode and Tetrode Boards
From: Mark Schoonover <mark@ka6wke.net>
Date: Thu, 13 Dec 2018 20:22:39 -0800
List-post: <mailto:amps@contesting.com>
Ian,

I'm in the process of building up a set of tetrode boards. You can
view my live stream page for videos during assembly:
https://www.ka6wke.net/live-stream

I can say I didn't have that much difficulty finding parts across the
pond. Mostly ordered from Digikey and Jameco. My challenge though was
with the PCBs - some newer components have smaller footprints than
when the boards were originally layed out. That hasn't been a show
stopper for me.

73! Mark KA6WKE

Website: https://www.ka6wke.net
Live Stream: https://www.ka6wke.net/live-stream
Facebook: https://www.facebook.com/ka6wke-live-stream
Twitter: https://www.twitter.com/ka6wke
EMail Announcement: ka6wke-announce+subscribe@groups.io
Author: 4NEC2 The Definitive Guide
EMail List:: 4nec2defguide@groups.io

On Thu, Dec 13, 2018 at 5:28 AM Ian White <boards@ifwtech.co.uk> wrote:
>
> Over the past 20 years I have supplied over 2300 boards and kits to
> tube amplifier builders around the world - literally, from Alaska to
> Antarctica.
>
> However, these products are nearing the end of their design lifetime
> and some parts are becoming harder to find, so we are giving a whole
> year's notice that the Tetrode Boards and the Triode Board will be
> 'retired' from the market by the end of 2019.
>
> Until then, sales will continue as normal (see
> tinyurl.com/gm3sek-boards.htm for ordering details and the
> downloadable user manuals).
>
> Support for existing customers will of course continue beyond that
> date.
>
> 73 from Ian GM3SEK
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>