Amps
[Top] [All Lists]

Re: [Amps] Acom 2000A Question

To: Paul Baldock <paul@paulbaldock.com>
Subject: Re: [Amps] Acom 2000A Question
From: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
Date: Tue, 4 Jun 2019 17:32:25 -0300
List-post: <mailto:amps@contesting.com>
Yes indeed and thanks.  Val at Acom in Bulgaria was very helpful.

Herb, KV4FZ

On Tue, Jun 4, 2019 at 5:17 PM Paul Baldock <paul@paulbaldock.com> wrote:

> acom@acom-bg.com
>
> They provide excellent trouble shooting via EMail.Usually send an email to
> them in the evening and there's a reply when you wake up in the morning.
>
> - Paul
>
> At 09:20 AM 6/3/2019, Herbert Schoenbohm wrote:
>
> I have an Aocom 200A and like it very much.  However, I noticed an unusual
> problem that now occurs. The amplifier works well on all bands except 20
> meters. On 20 meters I get an error message with the warning to reduce
> power.  The unit malfunctions with any drive level; over 10 watts.  My load
> is 1.1 to 1.  Do you have any suggestions on how I can further check this
> problem?
> Or...do you have an email for the manufacturer in Bulgaria?
> Herb Schoenbohm, KV4FZ
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>