Amps
[Top] [All Lists]

Re: [Amps] HV Fuse

To: "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] HV Fuse
From: Rob Atkinson <ranchorobbo@gmail.com>
Date: Sat, 21 Sep 2019 06:27:03 -0500
List-post: <mailto:amps@contesting.com>
I always thought the way to make a h.v. fuse was to bolt a pair of
ceramic standoffs in a convenient location, making them around 2 or 3
inches apart, and stretch a very thin gage copper wire between them,
roughly at or slightly less then the diameter of the plate choke wire,
then run the B+ line through this.   The standoffs should be taller
than the distance between them.

73
Rob
K5UJ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>