steve,
my experience with Econco was less than satisfying. they rebuilt two different
tubes for me and each turned out to have intermittent grid shorts.
the positive is that they refunded my money both times.
good luck.
larry n7dd
-----Original Message-----
From: Steve Bookout <steve@nr4m.com>
To: Amps <Amps@contesting.com>
Sent: Wed, 29 Jan 2020 1:57
Subject: [Amps] Econco Tube rebuilding
Hello all,
Has anyone on this group had a tube(s) rebuilt by Econco?
Will they work with the 'average guy'? After all, money is money.
I've sent emails to them about rebuilding a 3cx1200A7 and all I've
gotten in response is 'crickets'.
If they only work with commercial accounts, or some such thing, I would
appreciate at least an email stating that.
Maybe someone has direct contact info they would be willing to share
with me.
73 de Steve, NR4M
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|