[Top] [All Lists]

Re: [Amps] ACOM Director software

To: Robert <>, "" <>
Subject: Re: [Amps] ACOM Director software
From: AB2E Darrell <>
Date: Mon, 3 Aug 2020 13:02:47 +0000
List-post: <>
Hi Robert,
Sorry I've never tried to remote my setup.
Wouldn't you also need some sort of software like Go To My PC to get your home 
PC to work from McDonald's?
But I would think the Acom remote device would be key to success.
Best of luck finding your solution,
73 Darrell AB2E

From: Robert <>
Sent: Monday, August 3, 2020 1:38 AM
To: 'AB2E Darrell' <>; <>
Subject: RE: [Amps] ACOM Director software

this would be the setup

Acom to K3

K3 is “wired” to desktop / writelog

Writelog / writelog remote

the Original RCU & there is RS232 port beside it’s connection on back of amp.

Key question is on/off from outside the router.

as example, I load Acom Director on my laptop.

Go to McDonald’s free wifi, bring up Acom Director

I’d think something loads on the machine at the rig/amp

I’ve just downloaded Acom Director – so I’m at zero on that learning curve…



Midland, Texas

From: AB2E Darrell []
Sent: Sunday, August 02, 2020 10:07 PM
To: Robert <>;
Subject: Re: [Amps] ACOM Director software


Let me ask you, do you also use contest software such as N1MM+?

The Acom Director has the nicest looking interface (duplicate of the original 
RCU face).

I have had it working standalone, however, at this time you can't interface it 
with N1MM+ (although he claims a future version will have that).

There are two other solutions that work great...full control of Acom and both 
interface as well with N1MM+ and other software.

TRX-Manager has a total control interface a lot like Acom Director, except it 
is not fancy graphics. But you can monitor all functions and select them from 
the TRX-Acom half of the program. You can download it and try it for free.

It uses the same 3  wire null modem cable from the RS-232 port on the back of 
the Acom 2000A.

Likewise N4PY's software totally supports Acom 2000 interface and N1MM as well.

I'm assuming you have the original RCU, these are the best solutions for the 
original RCU.

73 Darrell AB2E


From: Amps <<>> on 
behalf of Robert <<>>
Sent: Sunday, August 2, 2020 10:53 PM
Subject: [Amps] ACOM Director software

The ACOM 2000 has RS232 port on back

Control software program is available from M0YOM

Anyone have experience with this method?

can it do remote on/off - aka from other side of router via internet?




Midland, Texas

Amps mailing list<>



Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>