And, when you run it at full legal, on a digital mode, it just loafs?
We all know that no Ham ever runs more than legal power, on any
band, in any mode ... ever ...
On 9/9/22 7:45 PM, Nidhog wrote:
For the same reason you ‘need’ a 900hp Corvette.
Sent from my iPad
On Sep 9, 2022, at 08:29, Pete Smith N4ZR <pete.n4zr@gmail.com> wrote:
OK, I give up - what's the point of 10 KW CCS?
73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at<https://reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.
On 9/9/2022 1:39 AM, jim.thom jim.thom@telus.net wrote:
10 kw CCS on 6M..using the 3CX-6000A7.
Ok, here's the 3rd installment of this project.
Here, the socket and chimney are installed. Due to space constraints, the
tube is in the corner. To get around piling on more stray C ..between side
/ rear wall..and anode, I had him space the anode 2.5" away from both. When
the space is say doubled, the C will drop to just 1/4. Same deal with
spacing between stator + rotor plates on an air variable.
Also note, instead of using machine screws to mount the .515" thick chimney
to the chassis...threaded studs were used instead. Studs screwed into the
teflon. Then chimney + studs dropped onto chassis. It's another way of
doing it. If mounting the chimney to the top lid, it's actually much
quicker using the studs.
https://www.youtube.com/watch?v=RBIT76-o6tM
<https://www.youtube.com/watch?v=RBIT76-o6tM&fbclid=IwAR10CtUWkUQ-LTRBvq6StAPbI2dhthPZTW5815ahAeuSY2t3I0ki02JF0vQ>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|