With smaller vacuum caps, closer to the grid and only 2" separation between
them, Q could be much lower and more L for a proper coil might be used.
73
Peter
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of jim.thom
<I have a bigger coil in my 2m amp and my 6m amp has quite a few turns.
<73 and thanks, Alek, VK6APK.
## The tube is run at 5.5 kv @ 3amps under load. Plate load Z = 1019 ohms.
With a conventional PI network, the MINIMUM Q we can use is a whopping 24.
That results in an insane 79 amps of RF flowing through the conventional
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|