Amps
[Top] [All Lists]

Re: [Amps] Brand new updated PS board for Command Technology amplifiers

To: <vk6apk@bigpond.com>, <amps@contesting.com>
Subject: Re: [Amps] Brand new updated PS board for Command Technology amplifiers
From: gudguyham--- via Amps <amps@contesting.com>
Reply-to: "gudguyham@aol.com" <gudguyham@aol.com>
Date: Sun, 21 Jan 2024 13:17:13 +0000 (UTC)
List-post: <mailto:amps@contesting.com>
Alek, when Kessler took over Commander from Pat Stein he teamed with Palstar 
and that was a welcomed change that he made. Unfortunately with only one run of 
amps made it’s anyone’s guest if with the abundance of control changes if any 
flaws were made there. 


Sent from the all new AOL app for iOS


On Sunday, January 21, 2024, 6:56 AM, Aleksandar Petkovic via Amps 
<amps@contesting.com> wrote:

Yeah, it is a bit of a pain to get to the HV parts but not too bad.

Phil, VK6GX cut the bottom out of his amp where the parts live while he 
had everything apart. He made a new cover plate and now has very simple 
access to the power supply.

I was going to do the same to my amp but decided that the amp would 
outlive me after I had changed the HV components, so I left it as is.

I actually opened it up again a year later because I bought one of 
W8JI's blowers to replace the sick one which was really noisy . . . . . 
and I still didn't modify the bottom.

Slow learner.🙂

73, Alek VK6APK.


On 21/01/2024 2:44 am, Rob Atkinson wrote:
> Sounds like the kind of problem that develops with table top ham gear
> that's crammed into a too small cabinet.
>
> Several years ago a friend of mine and I got into a Command amp that a
> mutual friend brought to us for repair.  It was the model that had a
> single 3cx800 on HF.  It turned out to be okay (some kind of operator
> error) but we spent enough time on it to take in how it was made, with
> the inaccessibility of the power supply area (caps and diodes).  That
> part of the amp sat in a shield, underneath the band switch and output
> network, and had no access panel on the underside of the cabinet.
> When we got it back together I told the owner to unload it ASAP
> because if a diode or filter cap ever crapped out, the bench time
> needed to get to the power supply and reassemble would make the repair
> four or five times more expensive than it needed to be.
>
> 73
> Rob
> K5UJ
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>