Date sent: Thu, 12 Aug 1999 22:17:04 -0500
From: Dayton Johnson <firstname.lastname@example.org>
I remember watching some white haired ol' weasel who, with a dual rhomboid
antenna, kicked butt in the 1296 MHz antenna gain competition at the 1996 CSVHF
Society gathering in Bloomington, Mn. You might take a gander at:
to see the competition in the 1296 MHz catagory.
I am happy that this subject came up and many thanks to W0OZI and W4RNL for
that piece of their lives that made me a believer.
> Steel Bill, Hi this is Dayton w0ozi
> The Dual Rhomboids for UHF are quite small about 6 wavelengths long and built
> on wood boom, so mounting them on tower or mast puts the ground many
> wavelengths. Unlike one thinks of , in the HF or even VHF the dimensions. the
> ground reflection is not is part of the operation.
> The antenna is very Hi gain on major lobe( about 5 degrees), it is quite
> band and works fine for SSB. From by experience, it will beat anything out
> there with exception of parabola.
> Dayton Johnson w0ozi
> "Steel" Bill wrote:
> > I was interested in a posting by Dayton Johnson, W0OXI, about his use of
> > dual and quad rhomboids for UHF ATV work. What I'd like to know is anyone
> > else using such antennas with great success (and with uses other than ATV -
> > say SSB)? Also, how are such antennas mounted (i.e., one wavelength above
> > ground, attached to a mast and rotor some four or five wavelengths above
> > ground, etc.)?
> > 73,
> > Bill, K4TUK
> > ------
> > Submissions: email@example.com
> Submissions: firstname.lastname@example.org
FAQ on WWW: http://www.contesting.com/antennaware-faq.html
Administrative requests: antennaware-REQUEST@contesting.com