Connect the transmission lines and feed lines all at the same point on your
short wire. They will appear in parallel.
de Paul, W8AEF
----- Original Message -----
From: "Pete Smith" <n4zr@contesting.com>
To: <antennaware@contesting.com>
Sent: Tuesday, May 27, 2003 8:05 PM
Subject: [Antennaware] Feeding transmission lines with a common source
> I would like to be able to model the situation where two antennas are fed
> through transmission lines from a common source, but am having trouble
> figuring out how to do that in NEC-2. I tried using a short wire, apart
> from the model itself, with the source in the middle and one transmission
> line connected to each end, but am getting error messages from MultiNEC
> that something is wrong in the transmission line definition. According to
> the EZNEC documentation I have, this should work, but it doesn't.
>
> Any suggestions much appreciated.
>
> 73, Pete N4ZR
>
> _______________________________________________
> Antennaware mailing list
> Antennaware@contesting.com
> http://lists.contesting.com/mailman/listinfo/antennaware
|