[Top] [All Lists]

[Antennaware] Re: Modelling help needed for160 m L-antenna on 20m

To: <>
Subject: [Antennaware] Re: Modelling help needed for160 m L-antenna on 20m
From: Terry Conboy <>
Date: Tue, 30 Jan 2007 09:46:44 -0800
List-post: <>
At 02:26 AM 2007-01-29, Kari SM0HRP wrote:
>I have a 135 feet L-antenna (70 feet vertical, 65 feet horizontal) for 160
>meters with about 20 ¼ wave radials to it. It works well on 160 m and is
>also resonant with low SWR on 24 Mhz and 28 Mhz. I now wonder how does the
>elevation and azimutal pattern look like on the latter two bands? Is there
>any low angle take offs or is it a ?cloud warmer? on the 24, 28 Mhz band?
>Can anyone help me with the modelling since I am not an expert on this and
>do not have EZNEC 3 or 4.  I do happen to have the EZNEC wire model file for
>the L-antenna from ARRL Compendium if that helps.


This antenna will have many lobes in all 
directions on 20m and higher bands.  Some of them 
are at low angles and may be useful.  Other lobes will warm the clouds.

(For Kari, I attached .jpgs of the low angle 
pattern at 14.2, 24.9 and 28.3 MHz which won't go through the reflector).

BTW, this antenna is simple enough that the free 
demo version of EZNEC, which is limited to 20 
total segments, will produce a fairly 
representative pattern (although the feed 
impedance will be somewhat inaccurate on 20m and up).

73, Terry N6RY

Antennaware mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Antennaware] Re: Modelling help needed for160 m L-antenna on 20m, Terry Conboy <=