[Top] [All Lists]

[Antennaware] Radials

To: "AntennaWare Reflector" <>
Subject: [Antennaware] Radials
From: "Jim Miller" <JimMiller@STL-OnLine.Net>
Date: Fri, 29 Feb 2008 17:39:50 -0600
List-post: <">>
What detrimental effect would there be if radials (25 or so) laying ON the 
ground had their ends stuck into the ground or held down by spikes or LARGE 
nails since this is a high voltage point?  The antenna in use was a 160 meter 
inverted L with about 54 ft vertical and the remainder horizontal.

At our clubhouse, (homebrew 4-1000 amp at 4800 volts) I came out during a cw 
contest and the ends of several of the radials had sparks continuous with the 
cw being transmitted (no problem copying whatsoever).  The ground was still 
partly snow covered and very wet and luckily so were the leaves that were in 
the spark path.  No fires were started but I started thinking about danger of 
someone touching the radials near the end.

TIA, 73, de Jim KG0KP
Antennaware mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Antennaware] Radials, Jim Miller <=