Antennaware
[Top] [All Lists]

[Antennaware] 160 meter 3/8 wire, steel or copper

To: <antennaware@contesting.com>
Subject: [Antennaware] 160 meter 3/8 wire, steel or copper
From: "OZ1AXG Flam" <oz1axg.nospam@dxmail.dk>
Date: Wed, 24 Sep 2008 20:21:36 +0200
List-post: <antennaware@contesting.com">mailto:antennaware@contesting.com>
Hi

A question about wire ...

I have constructed a 3/8 for 160 meter. I use the tower to support the
antenna. It runs 22 meter vertically and then (horisontal for 24,5 meters
(i.e. total 46.5 meter). distance from tower is 1 meter.
A the base of the antenna it is feed with a serial capacitor of 430 pF (a
330 in parallel with a 100pF : both door noob).

Ground is a combination of 4 ground rods and wire (space is limited). Best
swr @ 1860 Khz is 1:1.4. 1:2 bandwidth is app 80KHz. A noise bridse have
shown impedans around 70+j1.

Currently the wire is 1.5mm stainless steel wire.

How much would the antenna be improved if i substitute the SS wire with with
1.5mm braided copper wire?
I guess the seial capacitor would change as well ? any idea how much ?

Antennewire i use ( steel 40050 and copper: 40051):
http://www.wimo.de/cgi-bin/verteiler.pl?url=wireantennas_e.html

--
OZ1AXG Flam


_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware

<Prev in Thread] Current Thread [Next in Thread>