Thanks a lot for the calculation, and your right, it has been a problem
getting it close to 50 ohm with the current wire and ground loss. Very
interresting, that the your calulated values is so consistent with my
An extra question: If I where to replace the antenna wire with a 2.5mm Cu
wire - what implications would that have ?
(The 2.5 mm is double up in price :=) or would that just make thing worse ?
The serial capacity is a bit to large anyway, and last weekend i found out
that the capacity varies with temperature.
In daytime about 7% reflected power (0n 1824khz) and later on in the evening
that was 12% - a bit to much for my taste.
I will make some test with the capacitors ... but it looks like capacity
increases with lower temperatures :=)
Antennaware mailing list