In order for me to see what is going on, I need to run the director
configuration with AO Pro, which is the only tool that will allow me to
watch what is changing according to a formulaic progression of wires and
termination points. This is an interesting one with an audience and some
Preparation for WW, SS, etc., kept me busy elsewhere.
I'll give this a shot.
----- Original Message -----
From: "Pete Smith" <email@example.com>
Sent: Friday, November 28, 2008 9:55 AM
Subject: [Antennaware] 2-element delta loop array close to ground
>I am modeling a 20M 2-element delta loop array with the apex up, 12-foot
> spacing and the bottom about 35 feet above ground, fed at a lower corner,
> using Multi-NEC and NEC2. In driven/reflector configuration, it looks
> about like what I'd expect - 6 dBi gain and 14-18 dB F/B. But in the
> driven/director configuration, there isn't much directivity at all,
> regardless of frequency.
> Does this square with others' experience, or am I messing something up in
> the model?
> 73, Pete N4ZR
> the World Contest Station Database is back...
> Antennaware mailing list
Antennaware mailing list