[Top] [All Lists]

[Antennaware] K9AY and FLAG arrays

To: <>
Subject: [Antennaware] K9AY and FLAG arrays
From: "Andrew Ikin" <>
Date: Sun, 28 Dec 2008 12:24:43 -0000
List-post: <">>
Hello Guys,

Can any one let me have a ENZEC models for a 2 and 3 element endfire K9AY array 
and a 2 and 3 element FLAG array ( 1.8MHz 20m spacing will do fine ). I would 
like to compare these to 2 and 3 element loop and vertical arrays.

Btw, I now have Rx 500kHz to 2MHz 3 element endfire phased loop array working. 
I have added a varible gain/balance pot where the centre element is added to 
the outer elements. This ensures that I can optimise the array F/B over the 
band and it also compensates for minor amplitude differences due to the L/C 

Thanks in advance

Andrew Ikin ( G8LUG not Active )

Antennaware mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Antennaware] K9AY and FLAG arrays, Andrew Ikin <=