Thanks Stephen, I will give it a go.
> Free: MMANA-GAL modeling http://mmhamsoft.amateur-radio.ca/mmana/
> It's somewhat limited in what all it can do, but should be more than
> sufficient for what you are looking for...plus it has one of the easiest
> must usable GUIs around thus relativley quick learn.
> Stephen W9SK
> -----Original Message-----
> From: firstname.lastname@example.org
> [mailto:email@example.com] On Behalf Of Gary Smith
> Sent: Tuesday, April 21, 2009 7:37 AM
> To: firstname.lastname@example.org
> Subject: [Antennaware] Melted wire
> My last few posts to the Topband reflector appear to run into a 'filter' so
> I no longer post there.
> I'm having an issue with my inverted-L on 160, arcing and melting.
> The location appears to be fairly consistent at around 137' The total
> antenna length is 161'8" with series capacitence at the feedpoint. Is there
> any freely available or inexpensive modeling software that someone might
> direct me to, help me figure out what's going on?
> Antennaware mailing list
Antennaware mailing list